OBD-11 Pinouts

Useful diagrams I found to make sure I soldered the correct pins 7&8 together on the connector ready for the … More

IPK changer software testing

Nice bit of software to check the ipk is working ok. I just wanted to check that I could actually … More

Had my first attempt of connecting the 260 to toaf and all seemed OK. Before changing any of the settings … More

Another well used forum but based on Poland so you will need your translated switched on to participate. But the … More

A good place to ask questions about the suitability or any problems with using the TOAF software on your car. … More

Are you on the hunt for next best OBD2 scanner, but you’re not sure where to look? Do you want … More

If you read my previous ELM327 OBD2 Bluetooth Adaptor Review, you’ll recall I said I was going to test the device with the Torque … More

The generally used Testbook T4 produced by Omitec was specially designed software to diagnose and configure MGR cars. The T4 … More

A piece of kit that is invaluable on a car with engine management systems. I’ve had mine for years and … More

Replacement plugs and COP arrived today so decided to fit the suspect COP straight away as it would be a … More

After getting a P0353p reading on my DTC reader and after some advice from the 260 forum I needed to … More

I had noticed a bit of a “throb” through the car at about 1800rpm and had suspicions of a misfire … More